Category: Software

Categories Software

Mistakes to Avoid When Selecting a Proxy Provider

Author Darren Wells Posted on Posted on
0

The problem with internet usage is the risk of exposing personal data to hackers as you browse. For instance, if you visit an infected site, then you risk giving away your information. It is difficult to know a safe and unsafe website. You can avoid this risk by using ping proxies. This helps secure data and masks your information. Also, using a proxy server can help you steal your competitor’s strategies anonymously.

The truth is that proxies have many benefits to offer. Even then, when searching for a proxy, you need to consider several factors. The following are some of the mistakes you need to avoid when selecting a proxy server.

Limited Number of ISPs

proxy serverThe Internet Service Provider (ISP) allocates your computer an IP address. Thus, whenever you browse a site, you leave a track of the user-agent on the given website. The user agent contains information about the browser, device, ISP, and IP address. Thus, if the proxy provider you use has few ISPs, then the website owner can easily determine the regular use of certain ISPs. As a result, you can be flagged as spam. Make sure you select a proxy provider with lots of ISPs. In this way, you can connect through different proxies.

Lack of IP Rotation

The other important thing to pay attention to is IP rotation. This is particularly important if you are involved in web scraping. Remember that certain websites can detect unusual traffic from a given server. As a result, they can block the server from accessing the website. Make sure you choose a proxy provider that supports IP rotation.

Limited Locations

proxiesThe good thing about using a proxy is that you can connect anywhere. Thus, you can connect to various countries and access their local sites. Also, the feature can help you access geo-restricted sites that are not available in your area. A powerful proxy unblocks top streaming sites, such as Hulu, Prime, and Netflix. If you buy a proxy service with few locations, you cannot access everything you want as resources are limited.

Unlimited Data Usage

You might have come across proxy service providers that promise unlimited data usage. However, this cannot be the case. You can only access unlimited resources on shared hosts. This means that there are many other users using the same server as you. This increases the risk of being blacklisted. Therefore, you should check the features offered first before choosing a proxy.

Categories Software

Identifying Which DLL Files Are Used by Programs on Your PC

Author Darren Wells Posted on Posted on
0

DLL (Dynamic Link Libraries) files are a kind of library with different codes that can be used simultaneously by various programs. A perfect example is openal32.dll, a DLL file containing data, code, and resources used by other programs. DLL file errors are common. You can easily fix the error and other DLL errors on your device. To do this, restart your computer and restore all the deleted files from recycle bin. You can also reintsall the program, run a malware scan, or update your drivers.

How can you know and see which DLL files are used by the programs on your PC? The programs that share the codes contained in the DLL files load this information into the memory of the CPU. Through the command prompt tool, you can check which DLL files are in use. You can also see which files, in particular, each program executes.

DLL program filesHow to Know and See Which DLL Files Are Used by the Programs on Your PC

DLL files allow, among other things, to optimize the efficient use of CPU memory. By allowing code to be reused, it reduces the space required on the hard disk to run the same code in multiple programs. When this occurs, information from the DLLs being run can be gathered from memory.

To gain access to this information, you must go to the “Start” menu and click on “run” to access the command prompt tool. When the dialog box opens, key in the letters “cmd” (command) and press “enter” to “Ok.”

By executing this action, you will be able to access a dialog box. You should then proceed to type the indicated command to request the information of the files that our PC is executing at that moment from the system. This will show all the loaded DLL files and the applications that are running.

If you want to know which DLL files are being loaded by a particular program, you must expand the command a bit. Enter the text: tasklist/m/fi followed by “imagename eq [programname]”.

As you can see, in the previous command, the phrase program is in brackets. It is because, in reality, between those brackets, you must write the name of the specific program that you wish to investigate.

For example, by placing: tasklist/m/fi followed by “imagename eq winrare.exe,” you will obtain a list of the DLL files that are being executed by that application.

This way, we can know and see which DLL files are used by the programs on our PC at any given time. This information is essential in helping you to customize your PC. Follow these simple steps to customize your device and have the best user experience.

Categories Software

How to Run a Google Adwords Campaign Successfully

Author Darren Wells Posted on Posted on
0

Advertising on Google is the best way to grow your business. It is a fast method for growth, and it is also easy to scale. When it comes to Google AdWords, there are different ways to go about it. Always get advice from a professional so that you can get the best results.

Just like any other pay per click advertising, proper planning, and analysis will help you to get the best out of your money. Here are some tips to help you in running google AdWords campaigns successfully:

The Goal of the Campaign

It is essential to understand the role of the campaign. You need to know why you need a Google AdWords campaign so that you can target it accordingly. For instance, if your campaign is aimed at creating brand awareness, do not combine it with a sales campaign.

Each of the campaigns should be run separately and at different times. With a specific goal in mind, it is always easy to structure the campaign accordingly. Always set a goal so that it can be easy to analyze the campaign and also measure results.

Understand Your Audience

Understanding your audience is very important. It is always a good idea to know people who are likely to need your services. If you are selling gardening suppliers, your target audience is likely homeowners, and they are likely to be people above 25 years.

When you understand your target audience, it will be easy to get the right keywords to help you get a good return for your investment. You can always do some research to help you understand all the characteristics of your target audience.

Automate the Process

Automating the process is very important when it comes to google analytics. It is important to make sure that the process is conducted with little or no intervention.

When running multiple campaigns, it might not be very easy to keep up with everything. Instead of monitoring everything at once, make sure that you have an automation tool that will help you to adjust your campaign accordingly.

Analyze Performance and Adjust

When running a google ads campaign, do not just set and forget. It is also important to keep analyzing the performance. Make sure that you check in every few days to check how the performance is doing.

By checking your ad performance, you can measure the returns on investment and make the necessary changes to improve.

Categories Software

Things to Know About Signals and Signal Handling

Author Jennifer Mauney Posted on Posted on
0

A signal can be defined as a software interrupt or a way to communicate information to a particular process, hardware, or operating system. It is regarded as an interrupt because it changes the flow of a program. For instance, when a signal gets to a process,  the particular process stops whatever it is doing to handle or ignore the signal.

Also, signals can get delivered in an unpredictable manner, out of sequence, because the signals can originate from outside of the currently executing process. The best way of viewing signals is that it is a mechanism of handling asynchronous events. These events take place when a program executes signals out of order. On the other hand, synchronous events happen when a program executes signals iteratively.

How Signals are Used

You should note that signals have a lot of applications, particularly in programming and software development. There is a chance that you have used signals in smaller contexts. For instance, when playing a video game, you need to use different commands. If you want to end a game, you will send a command like terminate. The purpose of such a signal is to communicate a termination request.

Another important to note is terminal signaling. This is how programs terminate, start, and stop. Each of the signals describes an action that the process ought to take. Ideally, the action is outside normal control flow, and events will arrive asynchronously.

World of Signals

You should note that each signal has a name. The name of a signal starts with SIG and ends with the description. Some of the common names include SIGINT, SIGILL, and SIGALRM. For instance, SIGINT means signals interrupted by the keyboard.

Ideally, every signal has a value, name, and intended action. The signal name ought to start to become quite familiar, and the value of a signal is the same as the signal. In coding, what is used are the number and defined value.

Signals from Command Line

The terminology used for delivering signals to do an intended action is quite important. It is advisable to explore a wide range of signals and learn how to use them to send commands.

Handling and Generating Signals

After understanding signals and the way they communicate data to a process, you need to know signal handling. This is a process of writing a program that will handle the signal. In this case, it can ignore the signal or deliver it.

Categories Software

How to Access Spotify from Restricted Geolocations

Author Darren Wells Posted on Posted on
0

Streaming services are becoming common every day. However, some of these streaming platforms and sites like Spotify, YouTube Red, and Hulu, to mention a few, are not available in all online users. These sites have limited regions that can access their services. Such a situation is when the use of a virtual private network (VPN) is necessary. Luckily, users can have a free premium trial of VPN service. You can use such services to help you get access to your desired streaming sites, in this case, Spotify. Below is a quick guide on how you can set up your Spotify account and listen to cool playlists.

Download a VPN Software

Depending on the device, OS, and budget, you will find numerous VPN apps and software in your device’s digital store. Android users will find the apps in Google Playstore while iOS users can access them from the Apple Store. PC owners can get different suggestions from search engines like Google and Ecosia.

Download the Spotify Application

Once you have a VPN software set up, download the Spotify app. When downloading Spotify, mobile phone users in restricted geolocations are likely to find the app missing in their respective online stores. If you experience such a scenario, use any search engine and search for the app on third party sites. Also, when searching, you have the option to get the original app or a MOD version of the APK the gives you access to some of the premium Spotify features. After downloading the application/software, avoid starting the application immediately.

Activate VPN

Open your virtual private network and select a region that has access to Spotify or the particular service you want. Once active, you can then start up Spotify. Follow the registration process and wait for a verification message in your emails. Verify your email address and follow the steps needed to set up your Spotify account.

If you are a music artist seeking to join the platform as a distribution median, you can opt for services like Distrokid or UnitedMasters that will assist in getting your artist account set up.

Streaming

Now you are ready to listen to playlists from different curators as well as set up your playlist. The playlist can be for pubic listening and contribution or private. Remember, every time you need to access Spotify, the VPN should always be active first. If your device happens to detect your real geolocation, the app is likely to stop functioning.

Categories Software

Benefits Of Using Warehouse Management Software

Author Darren Wells Posted on Posted on
0

Running a distribution or manufacturing-based business is quite tough in this era. This is attributed to price sensitivity from customers and rising overheads. Thus, there is a need for a business to look at different options for it to become efficient. A warehouse management software is a useful tool to help you run a business with greater efficiency and opportunity to increase profits. The tool can help provide a broad range of benefits that include the following:

Reasons to use warehouse management software

Real-time stock control

You should nstorage roomote that manual stock control is one of the main reasons for the financial loss in a company. This is because the process is a haphazard affair and inefficient. However, with an automated system in place, you can maintain stock levels efficiently. You will find it easier to make a sound purchasing or production decision. You can share the information with many departments to ensure your warehouse is efficient as far as replenishing the stock is concerned.

Improved customer service

When you have a fully stocked warehouse at all times, you cut potential delays minimal. The software will ensure you have the required quantity of products available for your customer needs. Also, it will improve efficiency as far as lowering risk of errors in picking the stock. By reducing delays and improving product quality, you have potential to increase the number of repeat customers.

Greater productivity

Warehouse management software is a complex tool that can be used to help your current staff become more productive than before. This is because the process of ordering becomes efficient since it is up to date with your inventory. Thus, you do not need to carry out time-consuming checks. By streamlining the ordering process, it is possible to offer quick turnaround deliveries. Moreover, increased productivity frees workers to perform important responsibilities.

Reduces operational costs

You will find it tstorageo be a productive tool with tested algorithms, which improve its all-round efficiency when it comes to warehouse management. It can help reduce the number of workers in your warehouse. Moreover, it will help speed up your ability to fulfill customer orders. Also, you can reduce errors at the picking and packaging stage.

In any case, an innovative warehouse management software can integrate seamlessly into your business. It will help improve customer service, drive efficiency, and reduce delays. Ensure you purchase software that has been proven to work for businesses that are similar to yours.